trianglelab CR10 heatsink All Metal Hotend upgrade Kit for CR-10 Ender3 Printers micro swiss CR10 hotend Titanium heat breaker
Triangle Labs CR10/Ender Series All Metal Hotend Upgrade Kit High-Quality Micro Swiss Clone With Smooth Titanium Heat Break.
Dear customer, if you are upgrading from stock cr10 or ender 3 hardware you will need to buy set 3 you will need to use your stock heater coil and thermistor if they are in good condition. The separate bits set 1 and set 2 are not compatible with the stock Creality hot end parts and they are only listed to replace worn or broken micro swiss parts. set 3 comes with a free heat block and cover but no nozzle is included.
The Creality cr10 and ender series of 3d printers are great low-cost printers but they have a well-known issue with the hot end. The PTFE tube gradually slides out of the hot end causing a void which allows the filament to form a plug that reduces the effectiveness of retractions thus leading to stringing and gaps in your prints. The Micro Swiss helps to avoid this because the PTFE is not near the melt zone. it also allows for higher temperatures than the
PTFE lined stock hot end.
That said you should consider if you really need to upgrade to an all-metal hot end at all. If you only print PLA and don't plan on going above 235c but are having hot end problems here's a link to a free printable solution to shitty extrusion that is oh so common with the stock Creality hot end Thanks to Luke Hatfield https://www.thingiverse.com/thing:3203831 if this honest information saved you wasting a few bucks you can thank me by shopping here in my store for your other 3d printing needs or grab a coffee mug.
Brand Name: DFORCE
Item Type: J-head
Model Number: CR-10